Deploying the Firmware with Linux or macOS#
This document explains how to deploy the software using CMake and Make.
Building the Host Applications#
This application requires a host application to create the flash data partition. Run the following commands in the root folder to build the host application using your native toolchain:
Note
Permissions may be required to install the host applications.
cmake -B build_host
cd build_host
make install
The host applications will be installed at /opt/xmos/bin
, and may be moved if desired. You may
wish to add this directory to your PATH
variable.
Building the Firmware#
Run the following commands in the root folder to build the firmware:
cmake -B build -DCMAKE_TOOLCHAIN_FILE=xmos_cmake_toolchain/xs3a.cmake
cd build
make example_low_power_ffd
Running the Firmware#
Before running the firmware, the filesystem and command model must be flashed to the data partition.
Within the root of the build folder, run:
make flash_app_example_low_power_ffd
After this command completes, the application will be running.
After flashing the data partition, the application can be run without reflashing. If changes are made to the data partition components, the application must be reflashed.
From the build folder run:
make run_example_low_power_ffd
Debugging the Firmware#
To debug with xgdb, from the build folder run:
make debug_example_low_power_ffd