src/power#
This folder contains modules for lower power control and state reporting in the FFD application.
Configuration Notes#
The application monitors the VNR and produces low power events based on:
appconfPOWER_VNR_THRESHOLD
appconfPOWER_LOW_ENERGY_THRESHOLD
appconfPOWER_HIGH_ENERGY_THRESHOLD
appconfPOWER_FULL_HOLD_DURATION
The first three configuration options above determine when to begin transitioning, or continue to hold, the device in POWER_STATE_FULL. The last configuration option above determines the minimum period of time to device is allowed to wait for a wake word before requesting to transition into POWER_STATE_LOW. Each time POWER_STATE_FULL is set by the audio pipeline tile, the timer that is configured for a period of appconfPOWER_FULL_HOLD_DURATION milliseconds is reset, preventing any requests to POWER_STATE_LOW to be aborted.
appconfLOW_POWER_ENABLED enables/disables use of this low power functionality.
When appconfLOW_POWER_SWITCH_CLK_DIV_ENABLE is enabled, appconfLOW_POWER_SWITCH_CLK_DIV should be set appropriately. Clock divider values that result in frequencies greater than or equal to 20MHz have been observed to work.
Values for appconfLOW_POWER_CONTROL_TILE_CLK_DIV that result in frequencies greater than or equal to 300MHz have been observed to work.