• One XA-SK-GPIO Slice Card

• A variety of XMOS ports of 1 bit, 4 bit and 8bit type are exposed for access via 0.1” headers.
• Access to 4 LEDs via a 4 bit port
• Two push buttons are connected via a 4-bit port
• A small prototyping area is provided

• A pair of 1 bit ports (1 each for RX and TX) are used with an RS232 transceiver and DB9 connector to provide a standard UART terminal running up to 115.2 KBaud which can be connected to any PC COM port or Serial-to-USB adapter.

• An ADC with a standard 2-wire interface is provided, with an external linearised thermistor connected to the first ADC channel. The remaining 3 ADC channels are exposed on testpoints.